Appendix A - Technical Specifications - Perle IRG5140+ Series Hardware Installation Manual

Appendix A - Technical Specifications

Technical Specifications
General
Power Requirements
Power Line Protection
Power
Interfaces
Ethernet Port
USB
SIM
Environmental Specifications
Operating Temperature Ranges
Storage Temperature
Operating Humidity Ranges
Storage Humidity Ranges
Operating Altitude
MTBF
Standards and Certifications
Safety
Input: 9.6-60VDC, 1000 mA max
Fast transients 1.5KV (ENG61000-4-4 Criteria B)
Surge 2KV (EN61000-4-5 common mode), 1.5KV (EN61000-4-
5 differential and common modes)
Built-in protection against voltage transient including 5 VDC
engine cranking and +200 VDC load dump
SAE J1455, MIL-STD-810G
4
Ethernet 10/100/1000 Auto-neg
Isolation 1.5 kV
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
1
Type USB 3.0 Type-C
Can be used as a console or additional Ethernet port.
2
15*25mm (2FF)
-40°C to 70°C (40°F to 158°F)
-40°C to 85°C (40°F to 185°F)
0% to 95% non-condensing
0% to 95% non-condensing
Up to 3,048 meters (10,000 feet)
287,215 hours
UL/ULC/EN 62368-1 (previously 60950-1)
CE Mark
CAN/CSA-C22.2 No. 62368-1-14
UL 61010-1 and 61010-2-201
Perle IRG5140+ Series Router Hardware Installation Guide
Appendix A - Technical Specifications
15