Suction Filter, Changing - Husqvarna P 520D Workshop Manual

Suction Filter, Changing

Tools Dimension
Socket wrench
Torque wrench
U-grip for 32 mm
torque wrench
Tilt the seat back.
Release the hydraulic line (1) from its connection
to the tank (3).
Remove the screws (2) and lift up the connection.
Remove the suction filter (5) from its connection.
Wash the parts with white spirit and blow clean with
compressed air inside and out.
Fit a new suction filter on the connection. Torque,
60 Nm.
Assemble in the reverse order. Use a new gasket.
Tighten the nuts moderately so the gaskets are not
damaged.
1
2
3
4
5
6
1. Hydraulic hose
2. Screw
3. Tank connection
Quantity
8 mm 1
1
1
4. Adapter
5. Suction filter
6. Gasket
Hydraulic System
45
English –