Changing Lifting Arms And Bushings - Husqvarna P 520D Workshop Manual

Changing Lifting Arms and Bushings

Tools Dimension
Combination 13 mm
wrench
Combination 16 mm
wrench
Combination 18 mm
wrench
Socket wrench 13 mm
Circlip pliers
WARNING!
Heavy objects are released when
dismantling the lift arms.
The cutting deck must be removed and the lift arms
placed in raised position.
Dismantling
1. Remove the service cover.
2. Raise the machine and support the front edge.
3. Remove the wheels.
4. Dismantle the circlip (11) and two washers (9), (10).
5. Remove the screw (2) fastening the lug on the
shaft (1).
6. Tap out the shaft (1).
7. Dismantle the lift arm (6) by unscrewing and
removing the threaded bolt (3) and washers (4),
(7), and nylon spacer (5).
6
5
1 2
3 4
1. Shaft with lug and grease nipple.
2. Screw
3. Threaded bolt
4. Washer
5. Nylon spacer
6. Lifting arm
Quantity
1
1
1
1
SGA 1
8
7
9
10 11
1
7. Washer
8. Nut
9. Washer
10. Washer
11. Circlip
8. Press bushings (1), (3) out of the lift arms (2).
2
1
1. Bushing
2. Lifting arm
Chassis
3
3. Bushing
13
English –