Hour Meter, Changing - Husqvarna P 520D Workshop Manual

Electrical System

Hour Meter, Changing

Tools Dimension
Torx
1. Dismantle the front cover (2) from the steering
wheel console.
2. Loosen the headlight insert (1) and move out of
the way. Make sure the two clip nuts are not lost.
1
1. Headlamp insert
3. Loosen the cables from the hour meter (3).
4. Loosen the hour meter by compressing the
holder and pressing it through the steering
wheel console (1).
5. Assemble in the reverse order.
1. Steering wheel console
2. How to connect
42
– English
Quantity
T20 1
2
2. Cover
1
2
3
3. Hour meter
Temperature Gage, Changing
1. Dismantle the front cover of the steering wheel
console (2).
2. Loosen the headlight insert (1) and move out of
the way. Make sure the two clip nuts are not lost.
1
1. Headlamp insert
3. Remove the strap (1) with nuts (4) and
lockwashers (3).
4. Lift up the temperature gage (2) out of the
steering wheel console.
5. Loosen the connector from the temperature
gage by pulling straight out.
6. Assemble in reverse order.
IMPORTANT!
Take great care when tightening the strap.
The strap may be damaged if the temperature
gage is in the wrong position.
1. Strap
2. Temperature gage
2
2. Cover
2
1
3
4
3. Lock washer
4. Nut