Aastra 470 Installation Manual page 19

8. Set up the SMTP server
manager to set up an SMTP connector for the Exchange Server and to enter the
fax domain in the Exchange Server.
9. Install the fax client application on the fax users' PCs. To do so, open the
Configuration / Multimedia
the installation directly if you are working from the destination computer.
To set up the fax service on the communication server via an analogue network
interface, proceed as follows:
1. Follow the above instructions step by step: 2.
2. Assign the fax server as routing destination for the fax trunk group
(Configuration / Call routing
setting).
3. Enter as base number the entire external call numbers of the fax extension in
canonical format
setting).
4. In the fax recipient's user settings, select the set fax number and assign the user
a cover sheet (Multimedia
sheet setting).
5. Check whether an e-mail address has been entered
6. Continue with Step 7 of the above instruction.
Applications Card CPU2
syd-0421/1.2 – R2.1 – 07.2012
(Configuration
/ Client rollout
/ Trunk group
(Configuration / Call routing
section, Fax mailbox
Configuring the fax server
/ IP network / Routing
view, send the installation link or start
view, Routing destination
/ Trunk group
/ Fax number
(Configuration
view) and ask your IT
= Fax server
view, Base number
setting and Cover
/ User view).
19