General Input Settings - Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual

3 SELECTION OF A BUILT-IN PROGRAM
Installation Module Selection

3.5 General Input Settings

Set the following to execute the external device monitoring (EDM) and the reset switch status check in the
operation flow ( P. 10 ).
1
Click (General input settings) on the toolbar.
2
Select the following checkboxes.
External device monitoring (EDM)
"EDM Q0/Q1", "EDM Q2", "EDM Q3"
Reset switch status check
"Reset interlock"
(pushbutton switch) and
XS0, X0, X1, X2 and the +24 VDC.
Input Device Output Device
Selection Selection
(auxiliary NC contact of the contactor) are placed between the terminals
General Input Printing of Module
Settings Configuration
Printing of Wiring
Diagram
1
2
3
4
5
6
19