TDK-Lambda Genesys series Technical Manual page 29

TCP/IP Mode: This selects how the power supply gets it's network settings. Select either:
DHCP Assigned / AUTO IP: If this mode is selected, the network server uses DHCP
−
to assign the IP address, subnet mask , default gateway and DNS server (see glossary
section 1.3). Since the server assigns these, they are disabled (gray) on the web page.
If the server cannot make the assignment, the power supply shall revert to the Auto IP
method described in section 3.2.2
In this mode, the user may only change the hostname and description
Static IP: If this mode is selected, the IP address, subnet mask and default gateway
−
must be entered in the window fields. The settings must be compatible with the
requirements of the network server. They do not change as the power supply is moved
to different LAN connections
In this mode, there is no hostname connectivity so the hostname and DNS server fields
are disabled (gray)
Apply: Click this button to save the new settings
Close: Click this button to close the window
5.5.3. LAN ‡ Advanced Page
Under the "LAN" tab, an "Advanced" button is available at the top of the panel. When it
is clicked, the window that allows you to view and set four advanced LAN settings. These
settings are:
25