Wansview NCB521W User Manual page 11

http://www.wansview.com
1） Windows: the user can add multiple external devices, and display in multiple
window;
2） Resolution: to adjust resolution in the current screen, generally VGA/QVGA
optional;
3） Frame rate: to adjust refresh image times per a second;
4） Mode: to adjust video capture frequency of the camera ,so avoid ripple interference
caused by indoor lighting frequency;
5） Mirror：ticked it and the video screen will be flipped horizontally;
6） Flip：ticked it and the video screen will be flipped vertically;
7） Mute：When IPCAM transmitted audio to computer, If you ticked the mute, the
computer will not play the audio;
8） Video Panel：to hide and display the status bar located at the bottom of screen;
9） Sound Alarm： ticked the sound alarm, the computer will have voice prompt when the
device detects motion detection alarm;
10） Stretch：ticked it and stretch the current video image;
11） OSD：ticked it ,the screen will be display the current date and time in the top right
corner, not ticked, and then hide date and time;
12） Connect/Disconnect：connect or disconnect the current network camera;
13） Snapshot/View snapshot：click the snapshot, the device will be take a picture, same
as snapshot button in the status bar. click the view snapshot, can view the pictures
in the computer by path;
Figure 12 Video control
11