Usb - RME Audio ADI-2 Pro User Manual

2 channels analog / digital converter, 4 channels digital / analog converter

Hide thumbs Also See for ADI-2 Pro:

Table of Contents

17.4 USB

USB: interface mode, USB DAC.

This mode can be activated manually by selecting Basic Mode – USB. The device enters USB

mode automatically when Basic Mode is set to Auto and a USB connection is detected. USB

has priority over AD/DA mode.

In USB mode all inputs are routed to USB, all outputs are fed from USB. In SETUP – Options –

Device Mode – CC-Mode the unit can be configured as 2-channel (Stereo) or 6/8-channel (Mul-

ti-channel) device. Sample rates higher than 192 kHz and DSD128/256 are only available in 2-

channel mode, which is why this mode has been chosen as default.

Class Compliant Stereo mode

In 2 channel / Stereo mode only the analog inputs are sent as USB record signal, and the ste-

reo USB playback signal is available simultaneously at all analog and digital outputs.

The two block diagrams show the small differences between both modes.

USB Playback channels 3/4 can only be monitored in multi-channel mode. In stereo mode se-

lecting USB 3/4 plays channels 1/2.

Table of Contents

Show Quick Links

Table of Contents