PICTOGRAMS
The installation and user instructions are valid for all models, unless otherwise specified by the following pictograms:
Danger! Situation presenting immediate dan-
ger, or a hazardous situation which could cause
injury or death.
Consult another section
Further information
Hot surfaces, risk of burns
INSTALLATION CODES AND STANDARDS
Installations within the United States, must follow:
--1.State and local codes.
--2.National Electrical Code (ANSI/NFPA No.70, latest edition) available from the National Fire Protection
Association,
Batterymarch Park, Quincy, MA 02269.
--3.Vapor Removal from CookingEquipment, (NFPA-96, latest edition) available from NFPA.
WARNING
All installation work and non-routine maintenance must be performed exclusively
-
by qualified technicians, authorised by the manufacturer, in compliance with the regulations
in force in the user country and the regulations on systems and safety in the workplace.
WARNING
RISK OF FIRE OR ELECTRICAL SHOCK
DO NOT OPEN
WARNING TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK
DO NOT REMOVE COVER OR BACK
NO USER - SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED
SERVICE PERSONNEL ONLY
Read the instruction manual
Earthing symbol
Equipotential symbol
5