Accessories - Siemens SIMATIC Series Operating Instructions Manual

Overview

1.3 Accessories

1.3 Accessories
Accessories are available for your device. These are not included in the scope of delivery.
Information on available accessories is listed in the table below and on the Internet at the
following addresses:
● Industry Mall (https://mall.industry.siemens.com)
● IPC expansion components
automation/en/industrial-pc/expansion_components_accessories)
Name Description
Retainer for The retainer is a mechanical safety device
locking the in- for the internal USB interface. It optimizes
ternal USB the protection of an internal USB memory
interface stick against loads caused by vibration
and shock during transportation or opera-
tion.
This increases the reliability and opera-
tional safety of the device.
Tower Kit You can use the Tower Kit to convert the
device into an industrial Tower PC. This
step expands the operating range beyond
the control cabinet.
Components of the Tower Kit:
Cover
•
Feet
•
Accessories: Screws and rubber feet
•
28
(http://www.automation.siemens.com/mcms/pc-based-
Device Device
with with short
standard enclosure
enclosure
x
x
Operating Instructions, 04/2020, A5E49948632-AA
Article number / MLFB
x 6ES7648-1AA00-0XK0
x 6ES7648-1AA01-0XC0
(standard enclosure)
6ES7648-1AA01-0XE0
(short enclosure)
SIMATIC IPC547G