Siemens SIMATIC Series Operating Instructions Manual page 14

Overview
1.1 Product description
Installation options of drives in a short enclosure
Basic design
Number of drives for
internal, robust instal-
lation
Monitoring and safety functions
Temperature
Fan
Watchdog
Status displays, front
Status displays, rear
14
Drive bay plate
On a drive bay plate on the front, see section "Install and replace the internal hard disk, short
enclosure (Page 85)" and "Installing and replacing SSDs, short enclosure (Page 87)".
2 (3.5"/2.5")
Device with standard enclosure
Violation of high/low limits of permitted operating temperature
•
Speed monitoring
•
Monitoring functions for program execution
•
Monitoring time can be parameterized in software
•
Restart can be parameterized in the event of a fault
•
Warnings can be analyzed by application program (local, via LAN)
•
POWER – internal power supply available, PC switched on
•
HDD – access to hard disk drive / SSD
•
TEMP – temperature status
•
FAN – fan status
•
HDD alarm – hard disk drive / SSD status in connection with RAID and monitoring software
•
Redundant power supply
•
Device with short enclosure
-
Operating Instructions, 04/2020, A5E49948632-AA
SIMATIC IPC547G