Esd Guideline - Siemens SIMATIC Series Operating Instructions Manual

Hide thumbs Also See for SIMATIC Series:
Table of Contents

Advertisement

Low-voltage directive
● 2014/35/EU "Electrical equipment for use within specific voltage limits" (Low-Voltage
Directive).
Conformance with this standard has been verified according to EN 61010-2-201.
● 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
8.2.2

ESD guideline

What does ESD mean?
An electronic module is equipped with highly integrated components. Due to their design,
electronic components are highly sensitive to overvoltage and thus to the discharge of static
electricity. Such electronic components or modules are labeled as electrostatic sensitive
devices.
The following abbreviations are commonly used for electrostatic sensitive devices:
● ESD – Electrostatic sensitive device
● ESD – Electrostatic Sensitive Device as a common international designation
Electrostatic sensitive devices can be labeled with an appropriate symbol.
NOTICE
Damage to ESD from touch
Electrostatic sensitive devices, ESD, can be destroyed by voltages which are far below the
human perception limit. If you touch a component or electrical connections of a module
without discharging any electrostatic energy, these voltages may arise.
The damage to a module by an overvoltage can often not be immediately detected and only
becomes evident after an extended period of operation. The consequences are incalculable
and range from unforeseeable malfunctions to a total failure of the machine or system.
Avoid touching components directly. Make sure that persons, the workstation and the
packaging are properly grounded.
Charge
Every person without a conductive connection to the electrical potential of his/her
surroundings can be electrostatically charged.
The material with which this person comes into contact is of particular significance. The
figure shows the maximum electrostatic voltages with which a person is charged, depending
on humidity and material. These values conform to the specifications of IEC 61000-4-2.
SIMATIC IPC547G
Operating Instructions, 04/2020, A5E49948632-AA
Technical specifications
8.2 Directives and declarations
143

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic ipc547g

Table of Contents