Bios Description - Siemens SIMATIC Series Operating Instructions Manual

Hide thumbs Also See for SIMATIC Series:
Table of Contents

Advertisement

Technical specifications

8.6 BIOS description

Assigning exclusive interrupts in BIOS Setup (PIC mode only)
The interrupts are automatically assigned to the slots at system startup due to the default
settings in system BIOS. Several slots may share the same interrupt, depending on the
system configuration. This functionality is known as interrupt sharing.
Exclusive interrupts are not available in PIC mode. Disable specific system resources in
order to obtain exclusive interrupts. BIOS assigns the PIC interrupts at random during restart
of the system.
8.6
BIOS description
You can set the system functions and the hardware configuration of the device in the BIOS
Setup.
Prior to delivery, the BIOS Setup has the default settings that are suitable for the device
configuration. The most important default settings are shown in the table below.
Tab
Advanced
Power
Boot
RAID optional for devices with motherboard D3446.
1
Parameter "Hot Plug" is only available if "External SATA" is enabled (Enabled).
2
Note: After you have set the parameter "Hot Plug", you have to disable "External SATA" again
(Disabled).
Optional for devices with a removable tray.
3
For devices with motherboard D3446.
4
For devices with motherboard D3446, dependent on the processor equipment.
5
164
Option
Drive Configuration > SATA Mode
Drive Configuration > SATA Port 0: Hot Plug
Drive Configuration > SATA Port 1: Hot Plug
Drive Configuration > SATA Port 2: Hot Plug
Drive Configuration > SATA Port 3: Hot Plug
Drive Configuration > SATA Port 4: Hot Plug
CSM Configuration > Launch PXE OpROM Policy
System Monitoring > Fan Control
AMT Configuration > USB Provisioning of AMT
Power Failure Recovery
Low Power Soft Off
Hibernate like Soft Off
Quiet Boot
Setting
AHCI or RAID
Disabled, Enabled
2
Disabled, Enabled
2
Disabled, Enabled
2
Disabled, Enabled
2
Disabled, Enabled
2
Do not launch
Enhanced
Disable
5
Previous State
Disable
Disable
Disable
Operating Instructions, 04/2020, A5E49948632-AA
1
3
3
3 4
3 4
3 4
SIMATIC IPC547G

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic ipc547g

Table of Contents