Table of Contents
Advertisement
Hand-held Spray Gun HS 30
7.3
Commissioning
1.
Switch on the compressed air supply.
2.
Where applicable, switch on the material pressure pump or pressurised material container
for the spray medium.
3.
Point the hand-held spray gun at a test surface.
Fig. 4: Pull lever
4.
WARNING!
Sound pressure level
WARNING!
Risk of injury due to recoil forces during the activation of the hand-held spray
gun!
Start the spraying process by actuating the trigger ( Fig. 4/1).
5.
Adjust the spray pattern (
6.
End the spraying process by releasing the pull lever ( Fig. 4/1).
7.4
Adjusting the spray pattern
There are four different nozzle types:
200-0415 ￭ 200-0416 ￭ 200-0417 ￭ 200-0418
Ä Chapter 7.4 'Adjusting the spray pattern' on page 23).
ENGLISH
GB–23
Advertisement
Table of Contents
