Krautzberger HS 30 Operating Instructions Manual page 24

Nozzle type
Round jet
Flat jet
Rotary jet
Options for spray pattern adjustment
Fig. 5: Adjusting the spray pattern
The spray pattern can be impacted as follows:
n Adjust the atomisation air pressure via the pressure reducer or air regulator ( Fig. 5/1).
n Adjust the fluid pressure if supplied by pumps or pressure container.
n Adjust the needle stroke with the adjustment screw ( Fig. 5/2).
n Adjust width of the spray jet with flat jet controller ( Fig. 5/3).
n Selection of the nozzle size.
GB–24
Operating instructions
Description
cone-shaped jet in front of the
nozzle
width-adjustable jet for flat-shaped
application
a rotary pulse produces a highly
"swirled" spray jet
Remark
-
a closed flat jet controller creates a
round jet
suitable for difficult workpiece geo-
metries (angles, etc.)
mail@krautzberger.com, www.krautzberger.com
T-Dok-692-GB-Rev.0