Bosch MUC6 Series Instruction Manual page 28

en Troubleshooting
Problem
Display screen
E2, E5, E6 or E7
Display screen
E3
Display screen
E4
Display screen
E8
Display screen
E12
If you are unable to solve the problem, always call the hotline!
You will find the telephone numbers at the back of these instructions.
26
MUC6-8_RU_8001018000.indb 26
Cause
The appliance has overheated.
Short-circuit in the appliance.
Mains voltage too high.
Mains voltage too low.
Communication failure.
For programme selection
[ фритюр ] (deep frying): No oil
was filled in, but another liquid
(e.g. water).
Remedy
Disconnect the appliance from the
power supply and allow to cool down.
Restart the appliance once it has cooled
down.
Disconnect the appliance from the
power supply and contact customer
service.
Contact electricity provider or grid oper-
ator. Have the power supply checked by
an expert.
Restart the appliance once it has cooled
down.
Remove liquid from the pan, clean pan
and then fill in oil. Restart preparation
programme.
16.07.2015 12:15:13