Bosch MUC6 Series Instruction Manual page 14

Hide thumbs Also See for MUC6 Series:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
en
Preparation
6. Press button G to start the preparation
programme.
The appliance heats up the pan until the
pre-configured steam pressure is reached.
During the heating phase, lines that light
up in a clockwise direction appear in the
display.
Once the pre-configured steam pressure is
reached, the lines go out and the prepara-
tion time is shown in the display.
The preparation process starts automati-
cally. The preparation time counts down.
Once the preparation time is completed, an
audible signal sounds, the display flashes
and shows a "P". Steam automatically
escapes from the appliance intermittently
to reduce the pressure in the appliance
interior.
W Warning
Risk of burns!
Never bend over the appliance while steam
is escaping from it!
When the pressure in the appliance interior
has completely levelled off, the indicator
[ готово ] (ready) and the G button light up
and the Keep warm function is activated.
X "Keep warm function" see page 16
12
MUC6-8_RU_8001018000.indb 12
A rectangle lights up in the display (dotted
lines). The preparation programme is
completed.
7. Open the appliance. Open the pressure
locking handle for this purpose (M)
and press the opening button on the
base appliance for this purpose.
Notes:
■ Never use force to open the appliance!
■ Always shake the appliance gently
before opening, in order to dissolve any
steam bubbles that may have formed in
the food and to prevent blocking.
■ The pressure locking handle can be
easily opened when the steam has
completely escaped from the appliance
interior and the appliance is fully
depressurised.
■ The automatic steam release can take
some time. In order to accelerate the
process and if the appliance is not com-
pletely depressurised, the steam can
also be released manually. X "Release
steam manually" see page 13
8. Serve the prepared meal.
W Warning
Risk of burns!
■ The pan and any inserts that are used
may be very hot. Always use corre-
sponding handles or oven gloves.
Warning!
Condensation is formed during cooking.
Empty the condensation tank regularly.
Notes:
■ The preparation programme can be
stopped at any time using button H.
The appliance subsequently switches
to function selection mode. Before the
appliance can be opened, the steam in
the appliance interior must be released
manually. X "Release steam manually"
see page 13
■ Certain preparation programmes consist
of several preparation steps. X "Multi-
ple preparation steps" see page 15
16.07.2015 12:15:07

Advertisement

Table of Contents
loading

This manual is also suitable for:

Muc8 series

Table of Contents