Before using for
the fi rst time
Before the new appliance can be used,
this must be fully unpacked, cleaned and
connected to the power outlet. To do this,
perform the following steps:
1. Remove the appliance and all accessory
parts from the packaging.
2. Use the carrying handle to lift up the
appliance. Swing the carrying handle
upwards accordingly.
Warning!
You must use only the carrying handle for
safe transport of the appliance.
3. Place the appliance on a stable, level
and smooth work surface.
Warning!
There must be no sensitive surfaces and
appliances above and behind the appliance
that may be damaged by the temperature
development and the escaping steam.
4. Remove the steam outlet
Grip the steam outlet at the rear and pull
up and off.
MUC6-8_RU_8001018000.indb 7
Before using for the fi rst time
5. Remove valve plug
Pull off the valve plug in the steam
release chamber.
6. Open appliance lid
Open the pressure locking handle (M).
For this purpose, rotate the pressure
locking handle as far as possible in
an anti-clockwise direction. Press the
opening button on the base appliance to
open the lid.
7. Lift the pan out of the appliance interior.
en
7
16.07.2015 12:15:01