Bosch MUC6 Series Instruction Manual page 21

4. Once the desired preparation tempera-
ture is displayed, press button G.
The preparation programme with the set
preparation temperature is started.
If the temperature needs to be adjusted
individually for all preparation steps in a
selected programme, then repeat points 2
to 4 prior to starting the respective prepara-
tion step.
Note: these settings are not saved. If this
preparation programme is selected again,
the pre-configured preparation time will be
shown in the display once more.
Setting the steam pressure
For preparation programmes with pre-set
steam pressure function, the temperature
can be selected via "low steam pressure"
[ K ] or "high steam pressure" [ L ].
1. In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
The corresponding LED lights up in the
control panel and the pre-configured prepa-
ration time for this preparation programme
is shown. The indicator "low steam pres-
sure" [ K ] or "high steam pressure" [ L ]
lights up additionally.
Note: If [ K ] or [ L ] does not light up, the
steam pressure function is not available for
the selected programme.
2. Press the L button to toggle between
[ K ] and [ L ].
3. If the desired steam pressure is
displayed, press button G.
The preparation programme is started with
the set steam pressure function.
Note: these settings are not saved. If this
preparation programme is selected again,
the pre-configured steam pressure function
will be shown in the display once more.
MUC6-8_RU_8001018000.indb 19
Customised setting options
мой режим – my mode
Quick setting mode for customising the
steam pressure function, preparation time
and temperature setting for a cooking
process.
In function selection mode, button B and
the indicator [ мой режим ] (my mode) are
permanently lit. Button G flashes. "00:00"
is shown in the display.
Note: In order to switch on the steam pres-
sure function, the pressure locking handle
must be closed (N). The indicator [ K ]
lights up.
Setting the preparation time
1. Press button F once.
"00:00" flashes in the display.
2. Keep pressing button F until the desired
preparation time is displayed.
Setting the preparation temperature or
steam pressure
3. Without steam pressure function:
The pressure locking handle must be
opened (M). Press button C once.
"0000" flashes in the display. Button C
must then be pressed repeatedly until
the desired preparation temperature is
displayed.
or
With steam pressure function: The
pressure locking handle must be closed
(N). Press the L button to toggle
between [ K ] and [ L ].
4. Press button G to start with the
selected settings.
The appliance heats up the pan until the
target temperature or the steam pressure is
reached.
Once the target temperature or steam
pressure is reached, the lines go out and
the next preparation time is shown in the
display. The preparation process starts
automatically.
en
19
16.07.2015 12:15:10