Bosch MUC6 Series Instruction Manual page 10

en Before using for the fi rst time
8. Remove the lid insert
Turn the fastening screw anti-clockwise
and remove it. Use one hand to keep
the lid insert in position on the inside
of the lid. Use the other hand to push
the steam valve in the steam release
chamber through the opening on the
outside of the lid by applying slight
pressure. Carefully remove the lid insert
from the lid.
9. Remove the packaging material that
is on the appliance and the accessory
parts.
10. Check all parts for completeness.
X Figure A / B
11. Check the appliance and the accessory
parts for visible damage.
Warning!
Never operate a damaged appliance!
12. Thoroughly clean and dry all parts
before using for the fi rst time. X "Care
and daily cleaning" see page 21
13. Check safety devices
Lid insert: Check the sealing ring on the
lid insert for visible discolouring, cracks
or other damage.
Check that the safety and steam valve
as well as the overpressure protection
are clean. They must not be blocked
by foreign bodies. The overpressure
protection must be able to move freely.
Steam release chamber: Check the
steam valve seal in the steam release
chamber for visible discolouring, cracks
or other damage. Check that the white
steam release lever is clean. It must not
be blocked by foreign bodies.
8
MUC6-8_RU_8001018000.indb 8
14. Insert pan
Reinsert the pan in the appliance inte-
rior. The pan handles must be sunk into
the indentations.
Warning!
Before inserting the pan, check that the
appliance interior is dry and clean.
15. Place lid insert
The pressure locking handle must be
opened (M). Place the lid insert on the
lid insert mount with the steam valve at
the bottom. At the same time, guide the
steam valve through the steam valve
opening. Tighten the fastening screw for
the lid insert clockwise on the lid insert
mount.
16. Close the lid
Press the lid down until it clicks into
place. Close the pressure locking
handle (N). For this purpose, rotate
the pressure locking handle as far as
possible in clockwise direction.
17. Insert valve plug
Place the valve plug in the steam
release chamber on the steam valve
and press it down.
Warning!
Make sure that the white steam release
lever is positioned below the valve plug.
16.07.2015 12:15:03