2
Overview
The following operating modes can be used – independently of the valve type:
– Standard operation with one or more pressure zones
– Reversible operation with compressed air supply via connections (3), (5) and exhaust via port (1)
– Low-pressure operation at 0 ... 3 bar
– Vacuum operation at -0.9 ... 0 bar
2.1.3
Equipment levels
The valve terminal is available in the following equipment levels:
Electrical
Valve positions
connection
Manifold sub-base VMPAC-AP-...-1
(with grey electronics module
Valve terminal with multi-pin plug connection
Sub-D with 25 pins 1,2,3,4 ... 24
Sub-D with 44 pins 1,2,3,4 ... 32
Valve terminal with I-Port interface/IO-Link
Sub-D with 9 pins
1,2,3,4 ... 32
1) With exclusive use of the presented manifold sub-base
2) Electronics module for actuating one solenoid coil
3) Electronics module for actuating two solenoid coils
Tab. 2.1
Equipment levels
2.1.4
Size of the valves
The valve terminal is available in the size MPA14, i.e. the valves have a size of 14 mm.
Festo – GDCV-MPAC-EN – 1407NH – English
1)
2)
)
Manifold sub-base VMPAC-AP-...-2
(with black electronics module
1,2,3,4 ... 12
1,2,3,4 ... 16
1,2,3,4 ... 16
3)
)
11