EMC Connectrix B Series Hardware Reference Manual page 86

Glossary
Community (SNMP)
Compact Flash
Configuration
Congestion
Connection Initiator
Connection Recipient
Control Panel
Core Switch
CP Card
g-6
EMC Connectrix B Series DS-8B3 and DS-16B3 Hardware Reference Manual
CMT Central memory test.
A relationship between a group of SNMP managers and an SNMP
agent, in which authentication, access control, and proxy
characteristics are defined. See also SNMP.
Flash memory that stores the run time operating system and is used
like hard disk storage. Not visible within the processor's memory
space. Data is stored in file system format.
How a system is set up. May refer to hardware or software.
Hardware: The number, type, and arrangement of components that
make up a system or network.
Software: The set of parameters that guide switch operation. May
include general system parameters, IP address information, domain
ID, and other information. Modifiable by any login with
administrative privileges.
The realization of the potential of oversubscription. A congested link
is one on which multiple devices are contending for bandwidth.
A port that has originated a Class 1 dedicated connection and
received a response from the recipient.
A port that has received a Class 1 dedicated connection request and
transmitted a response to the originator.
Refers to the left-side panel of Web Tools, which accesses fabric-wide
functions such as zoning and events.
A switch whose main task is to interconnect other switches. See also
Edge Switch.
COS Class of service.
CP Control processor.
Control processor card. The central processing unit of the ED-12000B
contains two CP card slots to provide redundancy. Provides ethernet,
serial, and modem ports with the corresponding LEDs.
CRC Cyclic redundancy check. A check for transmission errors included in
every data frame.