Installing and Configuring the DS-8B3 and DS-16B3
2
2-16
EMC Connectrix B Series DS-8B3 and DS-16B3 Hardware Reference Manual
2. Type
. This prompts display sequentially; type a new
configure
value or press
E
NTER
3. At the Fabric Parameters prompt, type
Fabric parameters (yes, y, no, n): [no] y
4. Enter a unique domain ID, such as the domain ID used by the
previous switch, if still available:
Domain: (1..239) [1] 3
5. Complete the remaining prompts or press Ctrl+D to accept the
remaining default settings.
6. Re-enable the switch by entering the
7. Optionally, specify any custom status policies:
a. Enter the
switchstatuspolicyset
This command sets the policy parameters that determine the
overall switch status.
b. Customize the status policies as desired.
To deactivate the alarm for a particular condition, enter 0 at the
prompt for that condition.
to accept each default value.
and press
Y
switchenable
command at the prompt.
:
E
NTER
command.