EMC Connectrix B Series Hardware Reference Manual page 10

Preface
Related
Documentation
Conventions Used in
this Guide
vi EMC Connectrix B Series DS-8B3 and DS-16B3 Hardware Reference Manual
Chapter 3, Operating the DS-8B3 and DS-16B3, describes the
commands that require a license key.
Chapter 4, Monitoring and Maintenance, summarizes the commands
that are only available on the primary FCS when the security feature
is enabled.
Appendix A, Product Specifications, describes the specifications
needed for this product.
Appendix B, Customer Support, describes the procedure for contacting
EMC Corporation when you need help.
The Glossary defines terminology used in this manual.
Related product information can be found in the following EMC
publications:
EMC Connectrix B Series Features Guide
EMC Connectrix B Series Diagnostic and System Error Message
Reference Manual
EMC Connectrix B Series Fabric Watch Reference Manual
EMC Connectrix B Series Management Information Base (MIB)
Reference Manual
EMC Connectrix B Series Fabric OS Procedures Guide
EMC Connectrix B Series Fabric OS Reference Manual
EMC Connectrix B Series Web Tools Administrators Guide
EMC Connectrix B Series ED-24000B Hardware Reference Manual
EMC Connectrix Enterprise Director ED-12000B Hardware Reference
Manual
EMC Connectrix Departmental Switch DS-32B2 Hardware Reference
Manual
EMC Connectrix B Fabric Manager User Guide
EMC uses the following conventions for notes, cautions, warnings,
and danger notices.
A note presents information that is important, but not hazard-related.