Kubota V3300-E2B Workshop Manual page 94

V3300-E2B, V3300-T-E2B, WSM
Rocker Arm and Push Rod
1. Remove the rocker arm (3) as a unit.
2. Remove the push rods (1).
3. Remove the bridge arm (4).
(When reassembling)
• When putting the push rods onto the tappets (2), check to see if
their ends are properly engaged with the grooves.
IMPORTANT
• After reassembling the rocker arm, be sure to adjust the
valve clearance.
Tightening torque Rocker arm bracket screw
(1) Push Rod
(2) Tappet
S-31
DIESEL ENGINE
49.0 to 55.9 N·m
5.0 to 5.7 kgf·m
36.2 to 41.2 ft-lbs
(3) Rocker Arm
(4) Bridge Arm
W1050212
KiSC issued 06, 2006 A