EAS33348
REMOVING THE FRONT PANEL COVER
(RIGHT)
1. Remove:
• Front panel cover (right) "1"
a. Unhook the projection "a" on the front pan-
el cover (right) from the grommet "b" on
the side cover bracket.
b. Unhook the projections "c" on the front
panel cover (right) from the holes "d" on
the side cover (right).
c. Unhook the projections "e" on the front
panel cover (right) from the holes "f" on the
front cowling.
d. Unhook the projections "g" on the front
panel cover (right) from the holes "h" on
the front upper cowling.
c
a
e
EAS33349
INSTALLING THE FRONT PANEL COVER
(LEFT)
1. Install:
• Front panel cover (left) "1"
1
1
g
h
d
b
f
4-11
GENERAL CHASSIS (3)
a. Fit the projections "a" on the front panel
cover (left) into the holes "b" on the front
upper cowling.
b. Insert the projections "c" on the front panel
cover (left) into the grommets "d" on the
side cover bracket.
c. Fit the projections "e" on the front panel
cover (left) into the holes "f" on the front
cowling.
d. Fit the projections "g" on the front panel
cover (left) into the grommets "h" on the
side cover bracket.
b
f
d
h
EAS31353
INSTALLING THE FRONT PANEL (LEFT)
1. Install:
• Front panel (left) "1"
1
a. Fit the projections "a" on the front panel
(left) "1" into the holes "b" in the front panel
cover (left). Slide the front panel (left) rear-
ward.
b. Fit the projections "c" on the front panel
(left) "1" into the holes "b" in the front panel
cover (left). Slide the front panel (left)
downward.
c. Install the bolt and quick fastener.
Front panel bolt (left)
3.8 N·m (0.38 kgf·m, 2.8 lb·ft)
a
e
c
g