Yamaha YZF-R1 Series Service Manual page 446

Hide thumbs Also See for YZF-R1 Series:
Table of Contents

Advertisement

8. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-40.
OK ↓
9. Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-40.
OK ↓
10.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-40.
OK ↓
11.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 8-40.
OK ↓
12.Check the start/engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 8-40.
OK ↓
13.Check the entire starting system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-7.
OK ↓
Replace the ECU.
Refer to "REPLACING THE ECU (En-
gine Control Unit)" on page 8-41.
ELECTRIC STARTING SYSTEM
NG →
Replace the main switch.
NG →
Replace the neutral switch.
NG →
Replace the sidestand switch.
NG →
Replace the clutch switch.
NG →
Replace the handlebar switch (right).
NG →
Properly connect or repair the starting sys-
tem's wiring.
8-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yzf-r1m seriesYzfr1lYzfr1lcYzfr1mlYzf1mlc

Table of Contents