Yamaha YZF-R1 Series Service Manual page 685

EAS20598
P062F
EAS33078
TROUBLESHOOTING
Item
EEPROM DTC: an error is detected while reading or writing on EEPROM.
Fail-safe system
• Able/Unable to start engine
• Able/Unable to drive vehicle
Procedure
1. Locate the malfunction.
• Execute the diagnostic mode (Code D60)
2. Malfunction in ECU.
• Replace the ECU, and complete the service.
Refer to "REPLACING THE ECU (Engine Control Unit)" on page 8-41.
3. Delete the DTC and check that the MIL goes off.
• Confirm that the DTC has a condition of "Recovered" using the YDT, and then delete the DTC.
9-188
P062F