Measuring The Engine Oil Pressure - Yamaha YZF-R1 Series Service Manual

6. Install:
• Engine oil drain bolt
(along with the gasket
Engine oil drain bolt
23 N·m (2.3 kgf·m, 17 lb·ft)
7. Fill:
• Crankcase
(with the specified amount of the recom-
mended engine oil)
Engine oil quantity
Oil change
3.90 L (4.12 US qt, 3.43 Imp.qt)
With oil filter removal
4.10 L (4.33 US qt, 3.61 Imp.qt)
Quantity (disassembled)
4.90 L (5.18 US qt, 4.31 Imp.qt)
8. Install:
• Engine oil filler cap
(along with the O-ring
9. Start the engine, warm it up for several min-
utes, and then turn it off.
10.Check:
• Engine
(for engine oil leaks)
11.Check:
• Engine oil level
Refer to "CHECKING THE ENGINE OIL
LEVEL" on page 3-28.
EAS30810

MEASURING THE ENGINE OIL PRESSURE

1. Check:
• Engine oil level
Below the minimum level mark "a" → Add the
recommended engine oil to the proper level.
2. Remove:
• Front side cowling (left)
3. Remove:
• Oil pressure switch joint bolt "1"
)
New
)
New
a
3-30
PERIODIC MAINTENANCE
• Oil pressure switch joint (with the oil pressure
switch) "2"
EWA12980
WARNING
The engine, muffler and engine oil are ex-
tremely hot.
2
1
4. Install:
• Oil pressure gauge joint 18 mm "1"
• Oil pressure switch joint bolt "2"
Oil pressure gauge joint 18 mm
90890-04176
YU-04176
Oil pressure switch joint bolt
10 N·m (1.0 kgf·m, 7.4 lb·ft)
5. Install:
• Oil pressure gauge "1"
• Adapter C "2"
Oil pressure gauge set
90890-03120
1
2