Crankcase - Yamaha YZF-R1 Series Service Manual

EAS20059

CRANKCASE

Removing the crankcase breather cover and switches
1st 6 N ・ m (0.6 kgf ・ m, 4.4 lb ・ ft)
F W F W
3.0 N ・ m (0.30 kgf ・ m, 2.2 lb ・ ft)
*
D D 2nd
Specified angle 90˚
17 N ・ m (1.7 kgf ・ m, 13 lb ・ ft)
70 N ・ m (7.0 kgf ・ m, 52 lb ・ ft)
**
E
1.8 N ・ m (0.18 kgf ・ m, 1.3 lb ・ ft)
13 N ・ m (1.3 kgf ・ m, 9.6 lb ・ ft)
*
Following the tightening order, loosen the bolt one by one, and then retighten it to the specific
torque.
**
Apply Three Bond No. 1215B®
Order
Engine
Cylinder head cover/Intake camshaft/Exhaust
camshaft
Cylinder head
Generator rotor
Starter motor
Water pump
Clutch housing assembly
Oil strainer/Oil pump/Relief valve assembly
10 N ・ m (1.0 kgf ・ m, 7.4 lb ・ ft)
Job/Parts to remove
(8)
LT
LT
LT
4.0 N ・ m (0.40 kgf ・ m, 3.0 lb ・ ft)
'
Q ty
Refer to "ENGINE REMOVAL" on page 5-11.
Refer to "CAMSHAFTS" on page 5-18.
Refer to "CYLINDER HEAD" on page 5-33.
Refer to "GENERATOR" on page 5-44.
Refer to "ELECTRIC STARTER" on page
5-50.
Refer to "WATER PUMP" on page 6-13.
Refer to "CLUTCH" on page 5-60.
Refer to "OIL PUMP" on page 5-54.
5-71
CRANKCASE
12 N ・ m (1.2 kgf ・ m, 8.9 lb ・ ft)
LT
17 N ・ m (1.7 kgf ・ m, 13 lb ・ ft)
10 N ・ m (1.0 kgf ・ m, 7.4 lb ・ ft)
Remarks