EMS EMS560 User Manual page 22

In case of error the 'X' indicator appears on the left side of the screen.
This indicator appears only when footswitch is pressed, when pulses are
being delivered and when System error /warning /failure appears.
Touch the indicator and a pop-up message will appear: 'System error –
operation is disabled'.
If this error message continues to appear then please contact the service
department.
The Technician/Maintenance screen (tool icon) – is intended for use by
service personnel only and is accessible via a pass code.
Primo radial shockwave 560 – OM560EN Iss 3
22