Set The Reference Value Of Intermediate Presser Height (115) - Garudan GPS/F-1006 Series User Programming Manual

① Display of the Interface for Setting the
Reference Value of Upper Thread Tension
In the interface of code list, select the Reference
Value of Upper Thread Tension (code 113)
to display the interface for setting
the reference value of upper thread tension.
② Set the Reference Value of Upper Thread
Tension
In the interface for setting the reference value of
upper thread tension, user can use number key A
to input the figure directly or use +/- Keys to
change the value.
Press ENTER (C) to confirm the set value and the
system will return to the standard interface.
Attention:
After changing the reference value of upper
thread tension, the whole tension of the pattern
is changed.

9-3. Set the Reference Value of Intermediate Presser Height (115)

Set the reference value of intermediate presser height.
① Display of the Interface for Setting the
Reference Value of Intermediate Presser
Height
In the interface of code list, select the Reference
Value of Intermediate Presser Height (code
115)
setting the reference value of intermediate presser
height.
② Set the Reference Value of Intermediate Presser
Height
In the interface for Setting the Reference Value of
Intermediate Presser Height, user can use number
key A to input the figure directly or use +/- Keys
to change the value.
Press (C) to confirm the set value and the
system will return to the standard interface.
After changing the reference value of intermediate
presser height, the intermediate presser height of
the entire presser will be changed.
to activate the interface for
89
Setting Function