Garudan GF-1130-4412 MH User Manual
  1. Manuals
  2. Brands
  3. Garudan Manuals
  4. Sewing Machine
  5. GF-1130-4412 MH
  6. User manual

Garudan GF-1130-4412 MH User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

GF-1130-4412 MH
GF-2230-4412 MH
ANITA B s.r.o.
Průmyslová 2453/7
680 01 Boskovice
Czech republic
tel: +420 516 454 774
+420 516 453 496
fax: +420 516 452 751
e-mail:
info@anita.cz
User Manual
MP04800EN,MP04900EN_200204

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GF-1130-4412 MH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Garudan GF-1130-4412 MH

Summary of Contents for Garudan GF-1130-4412 MH

  • Page 1 User Manual GF-1130-4412 MH GF-2230-4412 MH ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP04800EN,MP04900EN_200204...
  • Page 2 © ANITA VERSION DATE APPROVED BY MP04800EN,MP04900EN_200204 4. 2. 2020 Ing. Kamil Krátký All rights reserved. Property of Anita B s.r.o. and protected by copyright. The use of this content without written consent of Anita B s.r.o. is prohibited. Copyright © Anita B s.r.o. (2020) MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...

  • Page 3: Table Of Contents

    © ANITA Content Basic Information ...................... 5 A1. Product description and intended use ................5 A2. Technical specifications ....................5 Safety Instructions ....................6 B1. General instructions ......................6 B2. Installation precautions....................6 B3. Operational safety instructions ..................7 B4. Working safety instructions ..................... 7 B5.
  • Page 4 © ANITA Troubleshooting ...................... 23 Drive Unit Manual ....................24 G1. Safety instructions ......................24 G2. Description and intended use of a drive unit ..............24 G3. Drive unit technical parameters ..................24 G4. Installation ........................25 G4.1. Connector description .................... 25 G4.2.

  • Page 5: A Basic Information

    Characteristic features of this machine are low level of noise and vibrations and large-capacity hook. A2. TECHNICAL SPECIFICATIONS Model GF-1130-4412 MH GF-2230-4412 MH Number of needles Needle gauge 6.4 mm / 7.9 mm / 9.5 mm / 12.7 mm...

  • Page 6: B Safety Instructions

    © ANITA B SAFETY INSTRUCTIONS Read the instructions carefully before installation and use. Keep this manual for future reference. B1. GENERAL INSTRUCTIONS 1. Do not operate the sewing machine until proper preparation has been made by a technician or qualified person and safety precautions have been taken. 2.

  • Page 7: B3. Operational Safety Instructions

    © ANITA B3. OPERATIONAL SAFETY INSTRUCTIONS 1. Do not use the machine without a belt cover, finger guards or other protective equipment. 2. All protective equipment of the machine must be in place before operation. Do not use the machine without covers and protective equipment. 3.

  • Page 8: B5. Disposal Instructions

    © ANITA 7. Do not work on the machine under the influence of alcohol or drugs. 8. We recommend wearing safety goggles. 9. Do not remove covers or any other safety device while the machine is running. 10. Always turn off the main switch when leaving the machine. B5.

  • Page 9: C Machine Setup

    © ANITA C MACHINE SETUP C1. OIL SUMP INSTALLATION Insert rubber cushions ①, ③, ④ into the bedplate and tighten the screws ②. Installation of the oil sump: According to the picture fasten the oil sump (5) to the plate with eight screws. MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...

  • Page 10: D Operating Instructions

    © ANITA D OPERATING INSTRUCTIONS D1. REPLACING THE NEEDLE Turn off the main power switch. Replace the needle only when the sewing machine is off. For 1-needle machine GF-1130: Turn the hand wheel to rise the needle bar 1 to the highest position.

  • Page 11: D2. Threading The Machine

    © ANITA D2. THREADING THE MACHINE D2.1. Threading the bottom thread 1. Pull the latch up ①. 2. Hold the bobbin with the loose end of the thread in a CCW direction and put it into the hook. 3. Pass the thread through the opening ② and ③ and under the bottom thread tension spring.

  • Page 12: D2.2. Winding The Bobbin

    © ANITA D2.2. Winding the bobbin 1. Put the bobbin on the winding pin. Pass the thread through points ① to ③ and wind the end of the thread a few times around the bobbin. 2. Press the winder lever Ⓐ. Press the foot controller and machine will start winding. When the bobbin is full, winding stops automatically.

  • Page 13: D2.3. Threading The Upper Thread

    © ANITA D2.3. Threading the upper thread 1. Thread the upper (needle) thread of GF-1130-4412 MH as shown in the picture. MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...
  • Page 14 © ANITA 2. Thread the upper (needle) threads of GF-2230-4412 MH as shown in the picture. MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...

  • Page 15: D3. Adjusting The Stitch Length And Reverse Stitch

    © ANITA D3. ADJUSTING THE STITCH LENGTH AND REVERSE STITCH 1. Press the locking plate ③ and set the desired stitch length by turning the dial ①. 2. Press the reverse lever ②, the machine will sew back. When the lever is released, the machine sews forward again.

  • Page 16: D5. Presser Foot

    © ANITA D5. PRESSER FOOT D5.1. Presser foot lift 1. Raise the presser foot lever ① up to a height of 9 mm. 2. Lowering the lift lever will lower the foot. 3. You can also lift the presser foot up to 19 mm using the knee lever or by pressing the pedal backwards.

  • Page 17: D6. Hook Safety Clutch Function

    © ANITA D6. HOOK SAFETY CLUTCH FUNCTION During sewing, when the hook reaches beyond the limit, a safety lock is activated to lock it. The needle will be still moving, but not the hook. Always remove the cause before running. 1.

  • Page 18: D8. Timing Of The Hook And The Needle

    © ANITA D8. TIMING OF THE HOOK AND THE NEEDLE Make the settings below with the stitch length set to 0. 1. Turn the handwheel and raise the needle bar 2.3 mm from the lowest position. Check if the needle ② and the tip of the hook ③ align with each other.
  • Page 19 © ANITA 3. To adjust the distance between the hook tip ③ and the needle ②, loosen the hook block screws ⑥ and the gear screws ⑤. Adjust the distance to 0.05-0.1 mm. Then tighten all screws. 4. Adjust the guard plate of the hook by bending it so that the distance between the plate ⑧...

  • Page 20: E Machine Maintenance

    © ANITA E MACHINE MAINTENANCE E1. LUBRICATING THE MACHINE E1.1. Lubricating the front part of the machine head 1. Loosen the front cover screws. 2. Remove the front cover. 3. Lubricate each day at the marked points. 4. Replace the cover. 5.

  • Page 21: E1.3. Refilling The Oil Sump

    © ANITA E1.3. Refilling the oil sump 1. Place the oil filter head ② on the hose ③ and put it into the oil sump ① as shown. You can attach it using the magnet. 2Add the oil until the cap ② is completely submerged. 3.

  • Page 22: E2. Adjusting The Lubrication

    © ANITA E2. ADJUSTING THE LUBRICATION E2.1. Adjusting the lubrication of the hook 1. Loosen the nut ② and adjust the amount of lubrication with the screw ①. Turn the screw clockwise to decrease or counterclockwise to increase the amount of oil.

  • Page 23: F Troubleshooting

    © ANITA F TROUBLESHOOTING Problem Cause Solution 1. Damage int the path of 1. Sand the surface with thread, damaged tip of the sandpaper. Sand the hook needle or the hook. with a file. 2. Upper thread tension is 2. Reduce the upper thread too high.

  • Page 24: G Drive Unit Manual

    © ANITA G DRIVE UNIT MANUAL G1. SAFETY INSTRUCTIONS 1) Read the manual carefully before installation and use. 2) Installation of the drive unit may only be carried out by a qualified person. 3) Follow all instructions indicated by symbols to avoid injury. 4) Do not use a multiple socket extension cord.

  • Page 25: G4. Installation

    © ANITA G4. INSTALLATION G4.1. Connector description Control box of the AS series MP04800EN,MP04900EN_200204 GF-1130-4412,GF-2230-4412 MH...

  • Page 26: G4.2. Power Supply And Grounding

    © ANITA Connect the pedal and all connectors to the appropriate sockets as shown. ATTENTION: If you are unable to connect the connectors to the appropriate outlet, check the direction of the pins. Make sure you are plugging into the correct outlet. G4.2.

  • Page 27: G5. Control Panel

    © ANITA G5. CONTROL PANEL G5.1. Control panel display The drive unit can be used with different models of sewing machines, which can have different optional functions as thread cutting, programmable back-tacking, automatic foot lift, etc. If your machine is not equipped with this option, some of the features described below will not be available for your model.
  • Page 28 © ANITA Display icons description Icon Description Icon Description Automatic Needle up stop trimming position Slow start Free sewing mode Start back tacking W sewing mode End back tacking Segment sewing Sewing segment Multi-segment index mode Numeric display Auto test Foot lift after Clamp function trimming...

  • Page 29: G5.2. Operation Panel Keys Description

    © ANITA G5.2. Operation panel keys description Button Name Description Function Use the button to select and confirm parameter (Parameters) settings and return to the sewing mode. Start back tacking Selects and turns on the initial back tacking. End back tacking Selects and turns on the end back tacking.
  • Page 30 © ANITA H-43. Press to enter the parameter. Stitch Press for half stitch compensation. Press and hold for compensation one stitch compensation. Hold for continuous compensational sewing. Trimming When the icon is lit, auto trimming function is on. Press again for turning the function off. Foot lift mode Select the presser foot stop position up or down.
  • Page 31 Katalog náhradních dílů Spare Parts List GF-1130-4412 MH ANITA B s.r.o. Průmyslová 2453/7 680 01 Boskovice Czech Republic tel: +420 516 454 774 +420 516 453 496 fax: +420 516 452 751 e-mail: info@anita.cz MP04800_200204...
  • Page 32 04. 02. 2020 Ing. Kamil Krátký All rights reserved. Property of Anita B s.r.o. and protected by copyright. The use of this content without written consent of Anita B s.r.o. is prohibited. Copyright © Anita B s.r.o. (2020) MP04800_200204 GF-1130-4412 MH...
  • Page 33 H. Lower Thread Winder Mechanism Components ..............30 I. Automatic Presser Lifting Mechanism .................. 32 J. Lubrication Components (1/2) ....................34 J. Lubrication Components (2/2) ....................36 K. Thread Stand Components ....................38 L. Air Mechanism Components ....................40 MP04800_200204 GF-1130-4412 MH...

  • Page 34: Frame & Miscellaneous Cover (1/2)

    © ANITA A. FRAME & MISCELLANEOUS COVER (1/2) MP04800_200204 GF-1130-4412 MH...
  • Page 35 9/64-40 L=4.5 B1111563000 Bed slide spring SS4110515SP Screw 11/64-40 L=5 B1109563000 Needle plate SS2110920TP Screw 11-64-40 L=8.5 21349600 Bed slide (right) A SS6111140SP Screw 11/64-40 L=11 23208507 Auxiliary cover 23208606 Sliding plate support 23208556 Auxiliary cover asm. MP04800_200204 GF-1130-4412 MH...

  • Page 36: Frame & Miscellaneous Cover (2/2)

    © ANITA A. FRAME & MISCELLANEOUS COVER (2/2) MP04800_200204 GF-1130-4412 MH...
  • Page 37 © ANITA A. FRAME & MISCELLANEOUS COVER (2/2) Ref. No Parts No. Name of parts Description Note 21349600 Bed slide (left) A CQ202000000 Oil wick L=12 10201200A Rubber plug 22619100A MP04800_200204 GF-1130-4412 MH...

  • Page 38: Take-Up And Upper Shaft Components (1/2)

    © ANITA B. TAKE-UP AND UPPER SHAFT COMPONENTS (1/2) MP04800_200204 GF-1130-4412 MH...
  • Page 39 Bearing B 010263 Bearing A SS4110815SP Screw 11/64-40 L=8 010258 Screw 21387501 Lower sprocket B1214019000 Sprocket ring 010254 Bearing A SS7151210SP Screw 15/64-28 L=14 010256 Motor plate 010245 Hand wheel 010255 Bearing B MDBMASD58A850A Motor LS5A16 Screw MP04800_200204 GF-1130-4412 MH...

  • Page 40: Take-Up And Upper Shaft Components (2/2)

    © ANITA B. TAKE-UP AND UPPER SHAFT COMPONENTS (2/2) MP04800_200204 GF-1130-4412 MH...
  • Page 41 Screw 15/64-28 L=7 40038700 Thrust collar asm. 40038702 Thrust collar SS8661030SP Screw 1/4-40 L=10 SB120000200 Bearing 20x42 SS7120760SP Screw 3/16-28 L=7.0 21353008 Horizontal feed cam cover SS7110710SP Screw 11/64-40 L=7 TA0750704R0 Rubber plug 40016148 Collar B washer MP04800_200204 GF-1130-4412 MH...

  • Page 42: Needle Bar Rocking

    © ANITA C. NEEDLE BAR ROCKING MP04800_200204 GF-1130-4412 MH...
  • Page 43 Square block B1410771000 Stud 21339304 Rocking shaft front metal 40027746 Bushing rear 21339056 Rocking rear arm asm. 21339007 Rocking rear arm SS6152440SP Screw 15/64-28 L=23.5 21347406 Rocking rear arm felt EA9500B0100 Cable band CQ202000000 Oil wick 0.05 m MP04800_200204 GF-1130-4412 MH...

  • Page 44: Pressure Adjusting & Upper Feed Mechanism (1/3)

    © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (1/3) MP04800_200204 GF-1130-4412 MH...
  • Page 45 SS6090910TP Screw 9/64-40 L=9 SS7110910TP Screw 11/64-40 L=8.5 B1510155000 Presser bar lower bushing B1470241HOO Walking foot asm. B1525241HAO Presser foot asm. 10713808 Connection link pin B 21340005 Upper feed link (B) 40033032 Presser bar holder A asm. MP04800_200204 GF-1130-4412 MH...

  • Page 46: Pressure Adjusting & Upper Feed Mechanism (2/3)

    © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (2/3) MP04800_200204 GF-1130-4412 MH...
  • Page 47 Feed shaft front metal 10714202 Vertical change belt 21438106 Stopper plate B SM1050801SR Screw M5 L=8 21339700 Upper feed stopper plate (B) SS4110815SP Screw 10713501 Spring hook 10716504 Vertical shaft spring B3416552000 Connecting rod hinge screw RE0500000K0 E-ring MP04800_200204 GF-1130-4412 MH...

  • Page 48: Pressure Adjusting & Upper Feed Mechanism (3/3)

    © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (3/3) MP04800_200204 GF-1130-4412 MH...
  • Page 49 © ANITA D. PRESSURE ADJUSTING & UPPER FEED MECHANISM (3/3) Ref. No Parts No. Name of parts Description Note 21339809 Upper feed dog spring hook SS7110830SP Screw 11/64-40 L=7.5 107013766A Eccentric rod (set) MP04800_200204 GF-1130-4412 MH...

  • Page 50: Feed Mechanism (1/2)

    © ANITA E. FEED MECHANISM (1/2) MP04800_200204 GF-1130-4412 MH...
  • Page 51 Screw 9/64-40 L=6 21337902 Eccentric pin SS709010TP Screw 9/64-40 L=8.5 21337308 Feed adjusting rod SD0800402TP Hinge screw D=8 H=4 21337605 Spring 21338009 Spring hook SS7111410TP Screw 11/64-40 L=16 21337209 Feed adjusting A B1610512000 Feed driving slide block MP04800_200204 GF-1130-4412 MH...

  • Page 52: Feed Mechanism (2/2)

    © ANITA E. FEED MECHANISM (2/2) MP04800_200204 GF-1130-4412 MH...
  • Page 53 E-ring 9 21388004 Reverse feed control lever SS6120930TP Screw 3/16-28 L=9 22814909 Felt NS6080210SP 1/8-44 SS6081810SP Screw 1/8-44 L=18 21364252 Feed base asm. WP0621016SH Washer SS6110630TP Screw 11/64-40 L=6 21378203 Feed rock shaft hinge screw 010932 1/4-40 MP04800_200204 GF-1130-4412 MH...

  • Page 54: Hook Shaft & Lower Feed Mechanism (1/2)

    © ANITA F. HOOK SHAFT & LOWER FEED MECHANISM (1/2) MP04800_200204 GF-1130-4412 MH...
  • Page 55 Bushing asm. front SS8151150TP Screw 15/64-28 L=10.5 B18035150A0 Bushing asm. intermediate SS8151150TP Screw 15/64-28 L=10.5 SS8660530TP Screw 1/4-40 L=4.5 22609804 Feed driving cam 22611701 Plunger bushing B SS8660530TP Screw 1/4-40 L=4.5 B1817051000 Hook driving shaft gear small MP04800_200204 GF-1130-4412 MH...

  • Page 56: Hook Shaft & Lower Feed Mechanism (2/2)

    © ANITA F. HOOK SHAFT & LOWER FEED MECHANISM (2/2) MP04800_200204 GF-1130-4412 MH...
  • Page 57 Ref. No Parts No. Name of parts Description Note SS8660670SP Screw 1/4-40 L=6.1 SS8660530TP Screw 1/4-40 L=4.5 V1816051000 Hook driving shaft gear large SS8660810TP Screw 1/4-40 L=8 SS8151150SP Screw 15/64-28 L=10.5 SQ1110401MZ Connecting screw 22611909 Oil pump shaft MP04800_200204 GF-1130-4412 MH...

  • Page 58: Thread Tension Components

    © ANITA G. THREAD TENSION COMPONENTS MP04800_200204 GF-1130-4412 MH...
  • Page 59 Bobbin winder tension disc D3168555H0B Tension spring No.1 11072402 Thread tension nut 21441100 Thread release plate SS4080620TP Screw nut SD0470281SP Hinge screw D=4.7 H=2.8 NS6110310SP 11/64-40 D3162555B00 Rotating stopper SS7110910TP Screw 11/64-40 L=8.5 21348206 Tension release bar PS0600502KP Spring pin MP04800_200204 GF-1130-4412 MH...

  • Page 60: Lower Thread Winder Mechanism Components

    © ANITA H. LOWER THREAD WINDER MECHANISM COMPONENTS MP04800_200204 GF-1130-4412 MH...
  • Page 61 9/64-40 L=6 21355755 Lower thread guide asm. 21355706 Fitting base S3162555B00 Thread guide NS6110310SP Nut 11/64-40 D3168555H0B Tension spring No.1 B3214047000 Bobbin winder tension disc 21378708 Thread tension post 11072402 Thread tension nut SM6040800SP Screw 22538706 Packing MP04800_200204 GF-1130-4412 MH...

  • Page 62: Automatic Presser Lifting Mechanism

    © ANITA I. AUTOMATIC PRESSER LIFTING MECHANISM MP04800_200204 GF-1130-4412 MH...
  • Page 63 21356506 Cylinder Connecting screw NM6080001SE SD0720331SP Hinge screw D=7.24 H=3.3 21356605 Lever A 21356803 Lever B SM6051002TP Screw M5x0.8 L=10 21356704A Shaft SPL4-01 Elbow 21356308 Cylinder stay (front) 21356407 Cylinder stay (rear) SS6151040SP Screw 15/64-28 L=10 21356704B MP04800_200204 GF-1130-4412 MH...

  • Page 64: Lubrication Components (1/2)

    © ANITA J. LUBRICATION COMPONENTS (1/2) MP04800_200204 GF-1130-4412 MH...

  • Page 65: Lubrication Components (2/2)

    Tube 0.6 m CQ202000000 Oil wick 0.7 m EA9500B0100 Cable band SS7110830SP Screw 11/64-40 L=7.5 21345103 Lubrication bracket SS4150915SP Screw 15/64-28 L=9 21345202 Oil pipe stay SS4150915SP Screw 15/64-28 L=9 40064409 Connecting screw asm. SQ1110401MZ Connecting screw MP04800_200204 GF-1130-4412 MH...
  • Page 66 © ANITA J. LUBRICATION COMPONENTS (2/2) MP04800_200204 GF-1130-4412 MH...
  • Page 67 Oil filter head 23630007 Tube 0.22 m 23630007 Tube 0.5 m 21338306 Lubrication felt presser SS5090610SP Mutual vertical change felt SS5090610SP Screw 3/16-28 L=7.0 21346606 Pipe support 23630007 Tube 0.22 010624 11/64-40 021364 Cover 010623 Screw 021360 Throttle sleeve MP04800_200204 GF-1130-4412 MH...

  • Page 68: Thread Stand Components

    © ANITA K. THREAD STAND COMPONENTS MP04800_200204 GF-1130-4412 MH...
  • Page 69 Spool rest arm 22931308 Spool rest rod upper 22931307 Spool rest rod joint SM4051408SE Screw M5 L=14 NM6050001SE 22930309 Spool rest rod lower 22931208 Thread guide WS0510002KN Spring washer NM6050001SE NM6160511SE M16x1.5 WP1612616SE Washer 16x30x2.6 WS1643202KP Spring washer MP04800_200204 GF-1130-4412 MH...

  • Page 70: Air Mechanism Components

    © ANITA L. AIR MECHANISM COMPONENTS MP04800_200204 GF-1130-4412 MH...
  • Page 71 D=4.1 L=20 021704 Screw M6 L=10 021705 Filter regulator SPC8-01 Nipple SPL6-01 Nipple WP0621016SH Flat pad 040151 Screw 022236 Electromagnetic valve asm. APU0604 L=500 Tube ø6 APU0425 L=500 Tube ø4 021658A Safety switch SS4110815SP Screw 021726 Pipe clamp MP04800_200204 GF-1130-4412 MH...

This manual is also suitable for:

Gf-2230-4412 mh

Table of Contents