D5. PRESSER FOOT
D5.1. Presser foot lift
D5.2. Foot pressure adjustment
MP05300EN,MP05400EN_200120
1. Raise the presser foot lever ① up to a height of 9 mm.
2. Lowering the lift lever will lower the foot.
3. You can also lift the presser foot up to 19 mm using the
knee lever or by pressing the pedal backwards. Pressing the
pedal backwards requires a pressurized air supply.
The nut ④ is used to lock the screw ③. Loosen it
before adjusting the pressure and tighten again
after adjustment.
Turn the foot pressure screw ③ clockwise to
increase the foot pressure. Turn it
counterclockwise to decrease the pressure.
Similarly, use the screw ① and nut ② to fine-
tune the foot pressure.
GF-1130-448,GF-2230-448 MH/L34
© ANITA
16