17. THE ADJUSTMENT OF THE MIDDLE PRESSER AND PRESSER FOOT
Loosen screw
③
, the hand wheel is 95°, keep the middle presser and presser foot all of a lump, then
tighten screw
③
. Check again, the number "3" on the hand knob
hand wheel and check whether the presser exchange is equivalent, if it has, loosen screw
adjust little.
18. THE ADJUSTMENT OF PRESSER FOOT
The hand wheel is 95°, turn the transfer ○4 back and forth, the presser ○2 is in the state of stillness,
then fasten screw
③
.
MP02900EN_181023
⑤
aims at the mark, turn the
③
© ANITA
to
14