Table of Contents
Advertisement
en | Hardware Installation Procedure for Standard Systems Utilizing LTC 8904 Series
24
CPU
Verify that switches located on dipswitch S1 and S3 are all OFF.On dipswitch S2 of the LTC
8916/01, verify that switches 1 to 4 are OFF. Switch 8 should be in the ON position. Switches
5 through 7 determine the monitor number range that the bay will be used for and must be set
according to the table below:
5
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Table 5.1: LTC 8916/01 Data Receiver Module Switch Positions (used in LTC 8902 Service Bays)
5.8
LTC 8918/01 Data Receiver Modules
The LTC 8918/01 Data Receiver modules (installed in LTC 8903 Series bays) contain three (3)
8-position dip switches.For system configurations of up to 2048 cameras and 512 monitors, ,
page 66 can be used as a guide for setting the Data Receiver DIP switches. Otherwise, follow
the procedure described below.Verify that switches 1 to 3 and 5 to 8 on dipswitch S1 are
OFF.Switch 4 on S1 should be placed in the OFF position if the LTC 8903 Series bay will be
used as a primary camera bay (one that will have cameras directly connected to it). If the LTC
8903 Series bay will be used as a secondary camera bay (one that will have other LTC 8903
Series bays connected to its inputs), place switch 4 on S1 in the ON position.If switch 4 on S1
has been set to the OFF position (for use as a primary camera bay as described previously) set
switches 1 to 4 on S2 according to the Primary Camera Bay Range in , page 24 shown below:
1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
2015.01 | 10.6 |
6
7
Monitor Range
OFF
OFF
1 to 64
OFF
ON
65 to 128
ON
OFF
129 to 192
ON
ON
193 to 256
OFF
OFF
257 to 320
OFF
ON
321 to 384
ON
OFF
385 to 448
ON
ON
449 to 512
2
3
4
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
Installation Manual
Camera Number Range
1 to 256
257 to 512
513 to 768
769 to 1024
1025 to 1280
1281 to 1536
1537 to 1792
1793 to 2048
2049 to 2304
2305 to 2560
2561 to 2816
LTC 8900 Series
Bosch Security Systems, Inc.
Hide quick links:
Advertisement
Table of Contents
