General Installation Considerations - Bosch LTC 8900 Series Installation Manual

LTC 8900 Series
Figure 6.3: Non Fault-tolerant 256 Camera x 64 Monitor System
6.1.6

General Installation Considerations

To facilitate system installation, it is highly recommended to install system components using
the following guidelines:
1.
2.
Bosch Security Systems, Inc.
Hardware Installation Procedure for Redundant System Configuration Utilizing LTC 8901
Cameras 1-256
LTC 8903 Camera Bay
LTC 8902 Monitor Bay
Logical Monitor Numbers 1-64
Monitors 1-64
The main system components are designed to be rack-mounted into standard 19 in. EIA
racks. Remove the 4 rubber bumper foot pads found on the bottoms of the bays before
installing them. Four (4) holes are provided for mounting the bays in the rack. Rack-
mounting screws and associated hardware are NOT included.
With redundant system configurations, install the LTC 8943/95 System Controller PC,
monitor, and keyboard so that they are easily accessible for the system installer/
programmer.
NOTE: The PC must be installed within 3 m (10 ft) of the main CPU bay and within 3 m
(10 ft) of the LAN switches so the supplied cables can be used.
Installation Manual
35
Series CPU | en
2015.01 | 10.6 |