Table of Contents
Advertisement
258
IN CASE OF EMERGENCY
Front Jacking Location
There is a jack location indicator on the rear
portion of the front lower control arm.
Front Lifting Point
When changing a front wheel, place the
scissor jack under the rear portion of the
lower control arm as shown below.
Front Jacking Location
Rear Jacking Location
Operate the jack using the extension with
jack hook and the lug wrench. The exten-
sion tubes may be used but is not required.
Rear Lifting Point
When changing a rear wheel, assemble the
extension with jack hook to the jack and
connect the extension tubes. Place the jack
under the axle between the wheel and the
shock bracket with the extension with jack
hook extending to the rear.
Rear Jacking Location
CAUTION!
Before raising the wheel off the ground, make
sure that the jack will not damage
surrounding truck parts and adjust the jack
position as required.
Advertisement
Table of Contents
