Table of Contents
Advertisement
5. Lock the center handle using the vehicle
key to secure the panel into place.
Divider Position
The divider position is intended for managing
your cargo and assisting in keeping cargo from
moving around the bed. There are 11 divider
slots along the bed inner panels which allow for
various positions to assist in managing your
cargo.
To install the bed extender into a divider
position, perform the following:
1. Make sure the center handle is unlocked
using the vehicle key and rotate the center
handle vertically to release the extender
side gates.
Center Handle And Lock
1 — Center Handle Lock
2 — Handle
2. With the side gates open, position the
extender so the outboard ends align with
the intended slots in the sides of the bed.
Aligning Gate To Slots
GETTING TO KNOW YOUR VEHICLE
3. Rotate the side gates closed so that the
outboard ends are secured into the
intended slots of the bed.
4. Rotate the center handle horizontally to
secure the side gates in the closed position.
Side Gates Closed
5. Lock the center handle to secure the panel
into place.
Extender Position
The extender position allows you to load the bed
of the truck beyond the tailgate. The bed
extender will add an additional 15 inches
(38 cm) in the back of the truck when additional
cargo room is needed.
91
2
Advertisement
Table of Contents
