Table of Contents
Advertisement
86
GETTING TO KNOW YOUR VEHICLE
To turn on the power outlet, simply plug in the
device. The outlet automatically turns off when
the device is unplugged.
NOTE:
The power inverter will only turn on if the igni-
tion is in the ACC or ON/RUN position.
Due to built-in overload protection, the power
inverter will shut down if the power rating is
exceeded.
WARNING!
To avoid serious injury or death:
Do not insert any objects into the
receptacles.
Do not touch with wet hands.
Close the lid when not in use.
If this outlet is mishandled, it may cause an
electric shock and failure.
Auxiliary Switches — If Equipped
There can be up to five auxiliary switches
located in the lower switch bank of the
instrument panel which can be used to power
various electronic devices and Power Take Off
(PTO) (if equipped). If PTO is equipped, it will
take the place of the fifth auxiliary switch.
Connections to the switches are found under
the hood in the connectors attached to the
auxiliary Power Distribution Center.
You have the ability to configure the
functionality of the auxiliary switches via the
instrument cluster display. All switches can now
be configured for setting the switch type
operation to latching or momentary, power
source of either battery or ignition, and ability to
hold last state across key cycles.
NOTE:
Holding last state conditions are met when
switch type is set to latching and power source
is set to ignition.
For further information on using the auxiliary
switches, please refer to the Ram Body
Builder's Guide by accessing
www.rambodybuilder.com and choosing the
appropriate links.
PICKUP BOX
The pickup box has many features designed for
utility and convenience.
Pick Up Box Features
1 — Upper Load Floor Indents
2 — Bulk Head Dividers
3 — Cleats
NOTE:
If you are installing a toolbox, ladder rack or
headache rack at the front of the pickup box,
you must use Mopar Box Reinforcement
Brackets that are available from an authorized
dealer.
Advertisement
Table of Contents
