Table of Contents
Advertisement
174
SAFETY
The seat belts in the passenger seating
positions are equipped with either a Switchable
Automatic Locking Retractor (ALR) or a cinching
latch plate or both. Both types of seat belts are
designed to keep the lap portion of the seat belt
tight around the child restraint so that it is not
necessary to use a locking clip. The ALR
retractor can be "switched" into a locked mode
by pulling all of the webbing out of the retractor
and then letting the webbing retract back into
the retractor. If it is locked, the ALR will make a
clicking noise while the webbing is pulled back
into the retractor. Refer to the "Automatic
Locking Mode" description in "Switchable
Automatic Locking Retractors (ALR)" under
"Occupant Restraint Systems" for additional
information on ALR. The cinching latch plate is
designed to hold the lap portion of the seat belt
tight when webbing is pulled tight and straight
through a child restraint's belt path.
Please see the table below and the following
sections for more information.
Lap/Shoulder Belt Systems For Installing
Child Restraints In This Vehicle
Regular Cab Automatic Locking Retractor (ALR)
Locations
ALR — Switchable Automatic Locking Retractor
Top Tether Anchorage Symbol
Quad Cab/Crew Cab Automatic Locking Retractor
(ALR) Locations
Cinching Latchplate — Cinching Latchplate
ALR — Switchable Automatic Locking Retractor
Top Tether Anchorage Symbol
Advertisement
Table of Contents
