Synthes MultiLoc Proximal Humeral Nail Technique Manual page 57

03.019.021 5.8 mm/2.8 mm Drill Sleeve, for
03.019.019, 3 ea.
03.019.023 End Cap Ruler for MultiLoc Humeral
Nailing System
03.019.024 Extraction Screw for MultiLoc Humeral
Nailing System
03.019.025 Screwdriver for 4.5 mm Titanium MultiLoc
Screws, self-retaining, 330 mm
03.019.026 2.5 mm Guide Rod with Stop, Trocar Tip,
230 mm length, 2 ea.
03.019.027 Protection Sleeve, for 03.019.003 and
03.019.004
03.019.028 Combined Hammer, 360 grams
03.019.029 Depth Probe for MultiLoc Humeral Nail
System
292.16 1.6 mm Kirschner Wire, 150 mm,
trocar point
292.26 2.5 mm Kirschner Wire, 285 mm,
trocar point
310.284 2.8 mm Drill Bit, quick coupling, 165 mm,
2 ea.
314.116 StarDrive Screwdriver Shaft, T15,
self-retaining, quick coupling
319.97 Screw Forceps
321.16 Combination Wrench, 11.0 mm width
across flats
393.105 Small Universal Chuck with T-Handle
511.773 Torque Limiting Attachment, 1.5 Nm,
quick coupling
MultiLoc Proximal Humeral Nail Technique Guide Synthes 55