Related Manuals for Synthes Hybrid Fixator Proximal Tibia Frame
Summary of Contents for Synthes Hybrid Fixator Proximal Tibia Frame
- Page 1 Hybrid Fixator—Proximal Tibia Frame. Using rings with clamps. Technique Guide Part of the External Fixation System...
- Page 2 Insert Schanz screw into proximal fragment Insert through wire / pin clamp. Note: A third wire can be inserted if the fracture pattern does not permit Schanz screw placement. 4, 5 Synthes Synthes Hybrid Fixator— Proximal Tibia Frame Technique Guide...
- Page 3 Use ring and anterior rod as handles to manipulate fracture. Tighten ring-to-rod clamp. Add second rod Connect ring-to-rod clamp and large combination clamp. Add carbon fiber rod. Note: Operating instructions for the Wire Tensioner (393.742) can be found in Wire Tensioners for Hybrid Fixator Synthes Synthes...
- Page 4 Schanz screws, stainless steel non – self-drilling Schanz screws and titanium self-drilling Schanz screws may also be used. * Although some components are MR Conditional, the standard hybrid frame is not safe to be utilized in an MR environment. Synthes Hybrid Fixator— Proximal Tibia Frame Technique Guide...
- Page 5 3/4 Ring allow two finger breadths of soft tissue clearance) 394.8x* 11.0 mm Carbon Fiber Rod 392.18 Protective Cap, for 1.8 mm and 2.0 mm wires 394.97 Protective Cap, for 11.0 mm rods 394.99x Protective Cap, for Fixation Pins Synthes...
- Page 6 This configuration increases bending stiff- Position for Hybrid External Fixation of the Proximal Tibia.” Journal of ness in the AP plane and thus better resists displacement forces. Orthopaedic Trauma. 2000;14;7. 502–504. Synthes Hybrid Fixator— Proximal Tibia Frame Technique Guide...
- Page 7 Open Compressor Technique Guide. Figure 5 6. G.L. Orbay, V.H. Frankel and F.J. Kummer. “The Effect of Wire Configuration in the Stability of the Ilizarov External Fixator.” Clinical Orthopaedics and Related Research. 1992;279. 299 – 302. 7. Kummer. op cit.. Synthes...
- Page 8 The wire/pin connection provides up to 15 mm of excursion for versatile wire or pin placement. Pull vise plates apart with thumb and fingers. Hook top vise plate over ring and release. Synthes Hybrid Fixator— Proximal Tibia Frame Technique Guide...
- Page 9 Preliminary Study.” Journal of Orthopaedic Trauma. 1994;8,6. 455–461. Weiner, L., M. Kelley, E. Yang, J. Steuer, N. Watnick, M. Evans, and M. Bergman. “The Use of Combination Internal Fixation and Hybrid External Fixation in Severe Proximal Tibia Fractures.” Journal of Orthopaedic Trauma. 1995;9,3. 244–250. Synthes...
- Page 10 Protective Caps, for 11.0 mm Rods, 1 pkg. of 10 —Processing Synthes Reusable Medical Devices—Instruments, Instrument Trays 394.993 Protective Caps, for 5.0 mm Fixation Pins, and Graphic Cases—DJ1305 1 pkg. of 10 —Processing Non-sterile Synthes Implants—DJ1304 Synthes Hybrid Fixator— Proximal Tibia Frame Technique Guide...
-
Page 11: Also Available
494.782–.788 5.0 mm, 100 mm – 250 mm 494.792–.798 6.0 mm, 100 mm – 250 mm Instruments Drive Adaptors with quick coupling 393.101 For 4.0 mm Schanz Screws 393.102 For 4.5 mm Schanz Screws 393.104 For 6.0 mm Schanz Screws 393.105 Small Universal Chuck with T-Handle Synthes... - Page 12 To order: (800) 523-0322 To order: (800) 668-1119 Fax: (610) 251-9056 Fax: (905) 567-3185 www.synthes.com © 2001 Synthes, Inc. or its affiliates. All rights reserved. Synthes is a trademark of Synthes, Inc. or its affiliates. Printed in U.S.A. 1/11 J3419-F...
Need help?
Do you have a question about the Hybrid Fixator Proximal Tibia Frame and is the answer not in the manual?
Questions and answers