Mounting/Dismounting The Labelling System - Festo MPA-F Series Description Pneumatics

2. Assembly
2.3

Mounting/Dismounting the labelling system

Mounting
1
Plug the yoke
into the front
mounting
2
Pivot the yoke to
the level of the
valve connection
surface
3
Lightly press
against the yoke
in the direction of
the arrow
4
Press the yoke
down into the
manifold block
Fig. 2/4: Mounting the labelling system yoke
Festo P.BE−MPAF−EN en 0804NH
To identify the valves or working lines, a labelling system can
be mounted on each manifold block on the MPA−F valve ter
minal.
Proceed as follows:
1. Mount the yoke of the labelling system as per Fig. 2/4.
3
2
1
2. Secure the yoke against unintentional release using the
safety clip as per Fig. 2/5.
4
2−13