Table of Contents
Advertisement
Measurement units can be changed on a sensor
Auto Off (Automatic shutoff)
How long will the gauge remain on if I leave it unattended?
The timeout for Automatic Shutoff is suspended
Prepare the meriGauge Plus for storage
Remove the batteries to store the gauge
Store the meriGauge Plus
Do not use the USB in hazardous locations
User Manual for meriGauge Plus System
Find Quality Products Online at:
9R479-D
You must use the meriSuite CG app to select or deselect the
•
Standard Units on a particular sensor from the preceding list.
By pressing the Units key on the gauge, you cycle through all
•
the configured units within the currently attached meriSense
that can be displayed on meriGauge plus.
The default setting is Always On.
•
You can configure the timeout for the Auto Off with
•
meriSuite CG.
The timeout for the Auto Off is suspended:
1. During data logging sessions to prevent an accidental loss of
information.
2. While the gauge is connected to a computer.
Auto Off is automatically re-instated after data logging is
completed and after the gauge is disconnected from the
computer.
1. Remove the batteries from the meriGauge Plus to store it for
30 days or more.
2. Follow the battery manufacturer's instructions for storing your
batteries.
The recommended storage temperature for the meriGauge Plus is
between –20 ºC to 70 ºC (–4 ºF to 158 ºF).
Connect a USB in safe locations only.
GlobalTestSupply
www.
October 2018
28 of 47
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
Need help?
Do you have a question about the meriGauge Plus and is the answer not in the manual?
Questions and answers