Information Key; Auto Off (Automatic Shutoff) - Meriam meriGauge plus User Manual

9R479-IR

Information key

Auto Off (Automatic shutoff)

meriGauge plus System User Manual
info@Meriam-Direct.com
The Information key is in the red triangle of the
Meriam logo
The information key displays:
Icon Explanation
The Information key (the
Meriam logo) displays the following:
•
BATT % displays the percentage on the bar
graph and in digits.
• CAL DATE is the date on which the
meriSense sensor was calibrated by Meriam.
•
USL displays the Upper Specification Limit on
the sensor.
•
LSL displays the Lower Specification Limit on
the sensor.
•
LT MAX % displays the Life-Time Maximum
that has been reached on the sensor.
How long will the gauge remain on if I leave it
unattended?
• The default setting is Always On.
•
You can configure the timeout for the Auto Off with
meriLink.
The timeout for Automatic Shutoff is suspended
• The timeout for the Auto Off is suspended during data
logging sessions to prevent an accidental loss of
information.
• Auto Off is automatically re-instated after data logging is
completed.
April 2016
red triangle
inside the
21
1.888.610.7664