System Operation; Manual Transmission Mode - Prestige APSRS Installation And Reference Manual

Detailed Descriptions: System Operation
Manual Transmission Mode (Ready Mode)
This remote start system is compatible with manual transmission vehicles. When Manual Transmission Mode is activated
in Feature Bank 3, Feature 10, this system will monitor multiple inputs to safely and securely remote start the vehicle.
Note: A connection to the vehicle's parking brake and tach signal (Analog or Data) is required.
Ready Mode
When manual transmission mode is programmed on, the system will require the user to enter Manual Transmission
Ready Mode. Ready Mode is a procedure that will keep the vehicle's engine running while the user exits the vehicle to
ensure the vehicle is in Neutral.
To activate Ready Mode:
1. With the vehicle's engine running; Set the parking brake to ON.
2. Release the vehicle's foot brake.
3. Activate the Prestige remote start by pressing the Start button on the remote control. The vehicle parking lights will
illuminate to indicate the remote start is activated. If you are using a 2-Way remote, the remote will beep four (4)
times.
4. Without pressing the brake, set the ignition key to OFF and exit the vehicle. The engine will remain running.
5. After exiting the vehicle, close all doors then press Lock on the remote control. The engine will shut down and the
system will sound two (2) short beeps followed by one (1) long beep to indicate Ready Mode is activated. The vehicle
will now remote start when activated.
What can cancel Ready Mode?
Ready mode will be canceled if the system detects any of the following:
• Open trigger zone (Doors, Hood, or Trunk).
• Ignition ON.
• Parking Brake OFF.
If ready mode is canceled the vehicle will not remote start. The user must repeat Steps 1-5 above to activate Ready
Mode.
Easy Entry Mode
Easy Entry Mode allows the user to gain access to the vehicle without canceling Ready Mode. This can be used to retrieve
forgotten item or to configure the climate controls for the next remote start cycle.
To use Easy Entry Mode:
1. Remote start the vehicle using the remote control.
2. Enter the vehicle.
3. When ready, Exit the vehicle and close all doors.
4. Press Lock on the remote control. The engine will shut down and the system will sound two (2) short beeps followed
by one (1) long beep to indicate Ready Mode is activated.
Manual Transmission Pit Stop Mode
Manual Transmission Pit Stop Mode allows the user to activate the remote start and exit the vehicle with the key. When
activated the system will keep the vehicle engine running for the runtime selected in Feature Bank 3, Feature 3.
To use Manual Transmission Pit Stop Mode:
1. With the vehicle's engine running; Set the parking brake to ON.
2. Release the vehicle foot brake.
3. Activate the remote start by pressing the Start button on the remote control. The vehicle parking lights will illuminate
to indicate the remote start is activated. If you are using a 2-Way remote, the remote will beep four (4) times.
4. Without pressing the brake, set the ignition key to OFF and exit the vehicle. The engine will remain running.
5. After exiting the vehicle, close all doors then press Lock button then Start (Key) button on remote control. The system
will lock all doors and remain running for the programmed remote start runtime.
APSRS_RevC_9/17
19