Turbo Timer; Silent Arm And Disarm - Prestige APSRS Installation And Reference Manual

Quick Reference: Programming & Diagnostics
2 /4 Hour Timed Start
This module has the ability to start the vehicle automatically at timed intervals. This feature can be useful in extremely
cold climates where starting the engine is the only means to keep the battery charged and fluids warm. The factory
preset start time is four (4) hours.
To select between two (2) and four (4) hour timers:
1. Press and hold the valet button.
2. Cycle the vehicle's Ignition ON/OFF 1x.
3. Release the valet button.
4. Within ten (10) seconds, press and release the valet button two (2) or four (4) times.
The vehicle's parking lights will flash two (2) or four (4) times to indicate the timer selection.
To activate two (2) and four (4) hour timer:
1. Cycle the vehicle's Ignition ON/OFF 1x.
2. Within ten (10) seconds, press and release the Start button on the remote control four (4) times.
The vehicle's parking lights will flash four (4) times to indicate the timer is activated. The vehicle will automatically start
every two (2) or four (4) hours as programmed for a maximum of forty-eight (48) hours. To cancel 2/4 hour timer mode,
start the vehicle using the remote control or the vehicle's Ignition key.

Turbo Timer

This model is equipped with a Turbo Timer. This feature will automatically engage the remote start to keep the vehicle's
engine running. This will allow for the engine to properly cool down and circulate fluids though the vehicle's Turbo
Charger. The Turbo Timer duration must be selected in Feature Bank 3 before it can be activated by the user.
To activate the Turbo Timer:
1. Start with the vehicle's engine running for at least fifteen (15) seconds.
2. Apply the vehicle's Parking Brake.
3. Press and release the valet button two (2) times. The vehicle's parking lights will flash two (2) times for confirmation.
4. Release and apply the vehicle's parking brake.
To use the Turn Timer feature:
1. With the engine running, activate the vehicle's Parking Brake.
2. Release the vehicle's brake pedal.
To cancel the Turbo Timer feature, press and release the vehicle's brake pedal or use the Start function on the remote
control. To prevent the Turbo Timer feature from engaging, press and hold the brake pedal while setting the vehicle's
Ignition to the OFF position.

Silent Arm and Disarm

Program the Prestige system to arm and disarm without notification beeps. (The siren will sound if the system is
triggered while armed.)
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button three (3) times. The system will respond with one (1) beep for ON or
two (2) beeps for OFF.
24
APSRS_RevC_9/19