Table of Contents
Advertisement
Using Your Remote Control
Arming the Security System
To arm the system, exit the vehicle, close all doors, then press the
parking lights will flash 1 time, indicating the system is armed, has locked the doors
(if equipped and connected) and activated the starter disable feature. The LED status
indicator will blink steadily, once per second.
Disarming the Security System
To disarm the system press the
the system is disarmed and has unlocked the doors (if equipped and connected).
User Selectable Notification Chirps
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1.
Turn the ignition ON then OFF.
2.
Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
User Selectable LED
This feature will control whether the LED is ON or OFF when the system is Armed/
Locked and can be toggled ON or OFF without entering the programming feature
banks.
1.
Turn the ignition ON, OFF, ON, OFF.
2.
Press and hold the valet/programming button for 5 seconds. The system
LED will respond with 1 flash for ON or 2 flashes for OFF.
*Throughout this manual, 'press' refers to pressing for less than 1 second; 'press and hold' refers to pressing for more
than 3 seconds.
2018 Voxx Electronics Corporation. All rights reserved.
button. The parking lights will flash 1 time, indicating
button. The
3
Advertisement
Table of Contents
